Touch-sensitive (touchless) basin mixer


Touch-sensitive (touchless) basin mixer - 13680.00 To order

A special feature of this product is that the water supply cycle ends automatically. To start the cycle, you need to bring your hands to the water supply sensor on the mixer. Repeat the cycle if necessary. This sequence of actions avoids touching the mixer during use and, of course, saves water.

Attention !!!
The water temperature regulator can be used to change the ratio of hot and cold water at the outlet, but hot or cold water cannot be completely turned off.

Optoelectronic (contactless) sink mixers are equipped with aerators from NEOPERL (Germany). At the request of the customer, the standard aerator can be replaced with a water-saving one.
The use of a water-saving insert helps to save up to 25% of water, but its use is possible only at low pressure (no more than 1.5 atm). If the pressure is higher than specified, water may spray slightly.

INSTALLATION DIMENSIONS AND PARAMETERS.

Scheme No. 1.

  • Consumption 6.7 l ± 0.1 l / min at a pressure of 2.5 atm;
  • Recommended pressure 2.5 atm;
  • Working temperature - up to 75°C;
  • Weight no more than 2.5 kg;
  • Power supply 6v batteries;
  • The maximum distance to the cut of the water supply bottom pipes with supply hoses 600 mm 520 mm, 400 mm-320 mm, 300 mm-220 mm.

Scheme No. 2.

  • Consumption 8.3 l ± 0.1 l / min at a pressure of 2.5 atm;
  • Recommended pressure 2.5 atm;
  • Working temperature - up to 75°C;
  • Weight no more than 2 kg;
  • Power supply 6v batteries;
  • The maximum distance to the cut of water pipes with supply hoses 600 mm 520 mm, 400 mm-320 mm, 300 mm-220 mm.;
  • The mixer is designed to operate at pressure from 1.5 to 6.3 atm.
More in this category:

Need a consultation?

We will tell you in detail about our services, types of work and typical projects, calculate the cost and prepare an individual offer!