Kitchen faucet elbow

Kitchen faucet elbow - 5460.00 To order

High-quality mixer of the Russian production, single-handled for kitchen sink, top liner. The mixer is adapted to the operating conditions in Russia. In the mixer with regulation of the pressure and water temperature with one handle, a mixing cartridge of the KCG, Citec or Fluhs type is installed with ceramic washers having a microporous surface filled with a temperature-resistant grease with a resource of at least 500 thousand cycles. The mixer spout is equipped with an aerator with a preliminary plastic separator for collecting rust particles and dirt and a multi-layer fine-mesh net that creates a soft, clean stream of water. Body parts are made of LS59 brass with chromium-nickel coating.

  • Installation distance between the axes of the supply pipes 150 ± 15 mm;
  • Deviation from parallelism between the axes of eccentrics ± 3 deg .;
  • The distance between the horizontal axis of the mixer and the top plane of the sink is not less than :;
  • with S-shaped spout-165 ± 5 mm;
  • with flat spout-110 ± 5 mm
  • Recommended pressure 2.5 atm;
  • Working temperature - up to 75°С;
  • Mixer weight in a set, no more than 2kg;
  • The mixer is designed to operate at pressures from 2 to 6.3 atm.
More in this category:

Need a consultation?

We will tell you in detail about our services, types of work and typical projects, calculate the cost and prepare an individual offer!