Wilo-DrainLift SANI-M

Overview

Large wastewater lifting unit with single pump for one- and two-family houses.

The Wilo-DrainLift SANI-M small wastewater lifting unit is ideal for use in single- and two-family houses with uncontrolled wastewater intake thanks to the single pump with large capacity and the electric motor with selectable "continuous operation" and "intermittent operation" modes. The easy-to-install unit is virtually versatile thanks to its 44 mm to 65 mm free passage, selectable air inlets and an optional version for particularly aggressive pumped liquids. The user-friendly design makes maintenance as easy as possible for the user. Thanks to the optional radio alarm transmitter, a push message is sent to a smartphone in case of malfunction.

Type

Connection-ready, fully flooded wastewater lifting unit with single pump for the pumping of wastewater containing faecal matter.

Application

  • Pumping wastewater containing faeces.
  • When it is not possible to pump waste water to a sewer system using natural inclines.
  • For drainage with backflow prevention if the discharge point is below the backflow level.

Equipment/function

  • Control unit with non-volatile alarm and generalized fault indication
  • Ready for connection
  • Tank with inspection opening and transparent cover
  • Analogue level detection system (4 ... 20 mA)
  • Check valve with test port
  • Sensor for monitoring the motor winding temperature (bimetallic sensor)

Scope of delivery

  • Drainage Technology with control unit and power supply cable with plug
  • Flange adaptor DN 80/100
  • Wrap DN 100 for connection to the pressure connection
  • Wrap 75 mm to vent port
  • Wrap DN 50 for emptying connection
  • Vent connection set with 124 mm O-ring and DN 100 seal
  • Fixing material
  • Sound absorbing mats
  • 9 V accumulator
  • Operation and maintenance manual

Model overview

Products


Product designation Article number
DrainLift SANI-M.12M/1 2549902
DrainLift SANI-M.12T/1 2549903
DrainLift SANI-M.16M/1 2549904
DrainLift SANI-M.16T/1 2549905
DrainLift SANI-M.21T/1 2549906
DrainLift SANI-M.12M/4C 2549919
DrainLift SANI-M.12T/4C 2549920
DrainLift SANI-M.16M/4C 2549921
DrainLift SANI-M.16T/4C 2549922
DrainLift SANI-M.21T/4C 2549923
DrainLift SANI-M.11T/4 2549934
DrainLift SANI-M.17T/4 2549935
DrainLift SANI-M.19T/4 2549936
DrainLift SANI-M.23T/4 2549937
DrainLift SANI-M.11M/4 2549938

Those. information

Name decoding

Example: DrainLift SANI-M.13M/4C
DrainLift Product
SANI Waste Water Disposal System
SANI.
M Size
13 Max. pressure
M Mains connection:
  • M = 1~
  • T = 3~
4 Motor and control unit version:
  • 1 = Operation mode: S3, Control unit: Control MS-L
  • 2 = Operation mode: S1, Control Unit: Control MS-L
  • 3 = Operation mode: S3, Control Unit: Control EC-L
  • 4 = Operation mode: S1, Control Unit: Control EC-L
C Compatible with corrosive pumped liquids

Technical data

  • Mains supply: 1~230V, 50Hz or 3~400V, 50Hz
  • Service mode: S3 10%/S1
  • Temperature of the pumped liquid: 3 ... 40 °C, max. 65 °C for 5 min
  • Liquid temperature: 3 ... 40 °C max.
  • Temperature of ambient liquid, max: 40 °C
  • Tank capacity: 99 liters
  • Volume relative to inlet head*: 50l (180mm*)/63l (250mm*)/74l (315mm*)
  • Capacitance: 50l (180mm*)/63l (250mm*)/74l (315mm*)
  • Pressure connection: DN 80.
  • Feedback connection: DN 100/150
  • Ventilation connection: 75 mm
  • Protection class of controller: IP54
  • Protection class of the waste water system: IP68 (2 m w.c., 7 days)

Materials

  • Motor housing: 1.4404
  • Hydraulics: PP-GF30
  • . Impeller: PP-GF30 or 1.4408
  • Wheel: PP-GF30 or 1.4408
  • Vessel: PE
  • Feedback valve: PPS

Description/construction

Gas and watertight storage tank with sloping manifold and inspection opening with transparent cover. Free choice of inlets, level detection system with 4…20 mA analogue output signal. Connection to pressure connection with integrated non-return valve with inspection opening.

Surface-cooled or self-cooling motor drive with motor winding temperature control sensor.

Pre-wired control unit for automatic operation:

Wilo-Control MS-L

  • Generalized fault alarm with potential-free contact
  • Built-in, non-volatile alarm
  • Adjustable switch-off delay time
  • Power supply cable 1.5 m long, with integrated plug

Wilo-Control EC-L

  • Control via display and alphanumeric character menu
  • Generalized fault alarm with potential-free contact
  • Separate fault alarm with potential-free contact
  • ModBus interface
  • Integrated, non-volatile alarm
  • Adjustable switch-off delay time
  • Power supply cable 1.5 m long, with integrated plug

Download

Declaration of Conformity Download
Installation instructions Download
Documentation Download

Colors

DOP

More in this category:

Need a consultation?

We will tell you in detail about our services, types of work and typical projects, calculate the cost and prepare an individual offer!