Wilo-Drain VC

Deciphering the name

For example: Wilo-Drain VC 32/10
VC Dirty water pump with stand
32 Nominal pressure nozzle diameter in mm
10 Max. head [m]


For pumping liquids up to 95 ° C
Long service life, including long-term idle
Simple operation thanks to the connected float switch

A type

Waste water pump, not flooded, with standard motor, foot-mounted design



Contaminated water with a maximum pumped liquid temperature of 95 ° C

Equipment / function

Mounted float switch with adjustable switching point

Contents of delivery

  • Pump with connected float switch
  • installation and operating instructions.

Model overview


Product designation Network connection Head max. H Flow rate max. Q Optimum flow Q opt Article number
Drain VC 32/10 1~230 V, 50 Hz - 7m³/h 4.995m³/h 2044582
Drain VC 32/10 3~400 V, 50 Hz - 7m³/h 4.995m³/h 2044583
Drain VC 40/20 3~400 V, 50 Hz - 16.5m³/h 9.61m³/h 2044584

Those. information

Technical Specifications

  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Temperature of the pumped liquid: 3 ... 95 °C
  • Working mode: S3 25 %
  • Pressure connection:
  • VC 32: R 1
  • VC 40: R 1½
  • Protection class: IP54


VC 32

  • Motor housing: Aluminum
  • Pump casing: EN-GJL-250
  • Impeller: 1.4028
  • Shaft: Stainless steel
  • Float: Polypropylene

VC 40

  • Motor housing: Aluminum
  • Pump casing: EN-GJL-250
  • Impeller: EN-GJL-250
  • Shaft: Stainless steel
  • Float: Polypropylene


Centrifugal pump, backstop design, with connected float switch for permanent installation.

Single stage hydraulic unit with semi-open multi-vane impeller and horizontal discharge nozzle. A suction filter is installed in the suction area of the hydraulic part. Drive by standard electric motor. The hydraulic part and the electric motor are rigidly connected by the pump shaft (in the shaft guard tube). The pump shaft is mounted on slide bearings and the slide bearings are lubricated by the pumped liquid.

A float switch is used for automatic operation. Switching points can be set by means of stops.




Wilo CAD

The Wilo CAD online library contains DWG drawings of Wilo pumping equipment. In this library, the dimensions of the pumping equipment are given as a guideline. Please note that the contents of the Wilo CAD online library are subject to technical changes.

More in this category:

Need a consultation?

We will tell you in detail about our services, types of work and typical projects, calculate the cost and prepare an individual offer!