Article: Н00003482
| Interface | RS-485 |
| Data archive in non-volatile memory | 60 months, 184 days, 1488 hours |
| Du | DN15 |
| Rated flow qp | 1.5 m3/h |
| Pipeline | straight |
| Max temperature | 105 °C |
| Minimum flow, qi, m3/h | 0.015 |
| Maximum flow rate, qs, m3/h | 3,5 |
| Sensitivity threshold, m3/h | 0.003 |
| Pressure loss at qp, MPa | <0.225 |
| Metrological class (EN1434) | 2 |
| Dynamic range of flow measurement qi/qp | 1:1000 |
| Nominal pressure, MPa | 1.6 |
| Temperature difference measurement range, °C | 3—104 |
| Temperature difference to start energy counting, °C | 0.25 |
| Heat unit | Gcal |
| Connecting thread | G3/4B |
| Length, mm | 110 |
Ultrasonic heat meter with radio output "Pulsar IoT" It is designed for apartment-by-apartment metering of heat energy consumption. It is mounted in a piping system with horizontal piping. Reading data does not require access to the meter and the presence of the tenant — transmission is carried out to the dispatching device via a radio channel. Using a radio channel allows you to transmit information regardless of the presence of a cellular signal. The radio module is a stand-alone — powered by a built-in battery.
One of the progressive solutions for efficient metering of heat consumption in houses and apartments — ultrasonic heat meter with radio output. Equipped with an ultrasonic flow meter, it provides heat energy measurement with minimal error. The difference in the signal transit time is fixed by a computational mechanism, based on these data, the volume of the used coolant is calculated.
The radio module is responsible for transmitting data to the dispatching device, which transmits information over a communication channel that does not depend on cellular communications and has a high degree of protection.
Универсальное приложение для работ по пусконаладке оборудования «Пульсар». Подходит для настройки приборов учета и счетчиков импульсов-регистраторов.
Version dated 08/05/2021.
Universal application for commissioning Pulsar equipment.
Suitable for setting up metering devices and pulse counters-recorders.
IoT installer. Designed for configuring radio transmitters.
In the case when the current settings of the converter are unknown, you can use the network device search utility.
Software for setting up electricity meters "Pulsar" during commissioning.
When starting the program, select the device in the "Object Tree". The set of tabs depends on the selected object or group of objects.
Types of tabs:
Подходит для автоматизированного учета в отдельных многоквартирных домах и жилищных комплексах:
Suitable for automated accounting in individual apartment buildings and housing complexes:
Для автоматизированного учета управляющих компаний, ТСЖ, ресурсоснабжающих организаций
Программное обеспечение PULSAR SET (совместно с SANKOM): Осуществляет подбор отопительных приборов, диаметров трубопроводов и запорно-регулирующей арматуры Определяет настройки балансировочных клапанов, клапанов терморегуляторов на подводках к отопительным приборам Составляет подробную спецификацию оборудования Позволяет использовать несколько источников тепла (холода) в одном проекте, что применимо при проектировании, например, четырехтрубных систем
— CO 7.2 Basic module (heating and ventilation)
— H2O 7.2 Basic module (water supply and sewerage)
We will tell you in detail about our services, types of work and typical projects, calculate the cost and prepare an individual offer!
