Padus UNI


Padus UNI M05/M11-523/P - 95220.00 To order
Padus UNI M05/M11-523/A - 97470.00 To order
Padus UNI M05/M11-523/VA - 108270.00 To order
Padus UNI M05/T11-540 - 96840.00 To order
Padus UNI M05/T11-540/A - 106020.00 To order
Padus UNI M05/M15-523/P - 109620.00 To order
Padus UNI M05/M15-523/A - 112050.00 To order
Padus UNI M05/M15-523/VA - 123390.00 To order
Padus UNI M05/T15-540 - 115110.00 To order
Padus UNI M05/T15-540/A - 146250.00 To order

 

Flexible waste water pump for various pumped liquids.

The Wilo-Padus UNI pump is the ideal pilot model for pumping contaminated water in small, industrial buildings. The pump is used as portable or installed in a mine. Corrosion-resistant composite hydraulics provide high reliability for versatile use in a wide variety of working environments. Installation is very simple thanks to its low weight, built-in condenser and threaded connection. Double mechanical seal and large seal chamber ensure long maintenance intervals. Direct access to critical components for maximum serviceability. In addition, Wilo-Control control units also allow the Wilo-Padus UNI pump to be integrated into an existing building management system.

A type

Submersible drainage pump for intermittent operation for mobile wet well installation

Explanation of the name

  • Example: Wilo-Padus UNI M05B / T15-540 / A
  • Padus Submersible drainage pump with hydraulics for centrifugal pumps
  • UNI Series with copolymer hydraulics
  • M Open multi-vane impeller
  • 05 Nominal diameter of the discharge connection: G2
  • B Materials used
  • without = standard version
    • B = V4A version
    • T Mains connection version:
    • M = 1 ~
    • T = 3 ~
  • 15 Value / 10 = P2 motor power in kW
  • 5 Frequency (5 = 50Hz, 6 = 60Hz)
  • 40 Mains voltage designation
  • A Additional electrical equipment:
    • No additive = with bare cable end
    • P = with plug
    • A = with float switch and plug
    • VA = vertical float switch and plug
  • Mains connection: 1 ~ 230 V, 50 Hz or 3 ~ 400 V, 50 Hz
  • Immersion mode: S1
  • Non-immersed operating mode: S2 - 15 min; S3 10%, S1 (version "C")
  • Connect. to the pressure. nozzle: G2
  • Protection class: IP68
  • Insulation heat class: F
  • Pace. pumping. liquids: 3 - 40 ° C, max. 60 ° C for 3 min
  • Free spherical passage: 10 mm
  • Cable length: 10m
More in this category:

Need a consultation?

We will tell you in detail about our services, types of work and typical projects, calculate the cost and prepare an individual offer!