Wilo-Stratos-D

Wilo-Stratos-D Double glandless circulation pump with flange connection

Overview

  • Energy savings thanks to increased system efficiency with Q-Limit (flow limitation)
  • Enhanced EEI ≤0,23 in all twin pumps
  • Optimized display for improved readability and control
  • Small footprint due to compact design and position-independent LCD
  • Modular concept for connection to all common bus systems (e.g. Modbus, BACnet, CAN, LON, PLR)
  • Control system for twin pumps with additional IF modules
  • Proven quality and reliability

Decommissioning program

The Wilo-Stratos high-performance pump, which has been a success for 19 years, will be completely phased out by the end of March 2020 and replaced by the new Wilo-Stratos MAXO smart pump. The new Wilo-Stratos MAXO pump technology will continue the success of the Stratos series.

Type

Double wet rotor circulator pump with flange connection, electronic commutated motor with automatic speed control

Application

Heating systems, air-conditioning systems, closed cooling circuits, industrial circulation systems

Heating/air conditioning systems, closed cooling circuits

Equipment/function

Operating modes

  • Manual control mode (n = constant)
  • Δp-c for constant differential pressure
  • Δp-v for variable differential pressure
  • Δp-T for temperature-dependent differential pressure (programmable via IR-Stick, IR-Monitor, Modbus, BACnet, LON or CAN)
  • Q-Limit to limit the maximum flow (programmable only via IR-Stick)

Manual control

  • Setting of operating modes
  • Setting the flow rate
  • Setting the automatic speed reduction mode
  • Setting the pump ON/OFF
  • Setting the speed (manual changeover)

Automatic control

  • Flexible power adjustment depending on operating mode
  • Automatic operation with reduction
  • Disengagement function
  • Fast start-up
  • Full motor protection with integrated electronic shutdown

External control

  • Control input «Off by priority» (possible with Stratos IF modules)
  • Control input «Min power by priority» (possible with Stratos IF modules)
  • Control input «Analog In 0 - 10V» (remote speed switching), possible with Stratos IF modules
  • Control input «Analog In 0 - 10 V» (remote setpoint change), possible with Stratos IF-modules

Alarms and indication

  • Separate/common fault alarm (potential-free NC contact), programmable with IR memory card/IR monitor
  • Generalized fault alarm (potential-free NC contact)
  • Separate operation alarm (potential free normally open contact), possible with Stratos IF modules
  • Light Fault indicator
  • LCD display for pump parameters and error codes

Data exchange

  • Infrared interface for wireless data exchange with IR-Stick/IR monitor
  • Serial digital interface Modbus RTU for connection to building automation system via RS485 bus system (possible with Stratos IF-modules)
  • Serial digital interface BACnet MS/TP Slave for connection to building automation via RS485 bus system (possible with Stratos IF-modules)
  • Serial digital CAN interface for connection to building automation via bus system (possible with Stratos IF-modules).
  • LON serial digital interface for connecting to the LONWorks network (possible with Stratos IF modules)
  • Serial digital interface
  • Serial digital PLR interface for connection to building automation via Wilo interface converter or specific communication modules (available with Stratos IF-Modules)
  • Serial digital PLR interface for connection to building automation systems

Control of twin pumps (twin pump or two single pumps)

  • Operating/standby mode (automatic changeover in case of fault/pump timer operation): various combinations with Stratos IF-Modules (accessories)
  • Two Pump Co-Operation (switch-on second pump during peak demand with efficiency optimisation): various combinations with Stratos IF Modules (accessories)

equipment

  • flange versions:
  • Standard version for pumps DN 32 – DN 65: Combination flange PN 6/10 (flange PN 16 as per EN 1092-2) for counter flanges PN 6 and PN 16
  • Standard version for DN 80 pumps: Flange PN 6 (designed for PN 16 in accordance with EN 1092-2) for counter flange PN 6
  • Special version for pumps DN 32 to DN 80: Flange PN 16 (in accordance with EN 1092-2) for counter flange PN 16,
  • Integrated change-over valve in the pump casing
  • Socket for optional Wilo IF-Modules

Model overview

Those. information

Name decoding

Example:

Wilo-Stratos-D 40/1-8

Stratos

High efficiency pump (flanged pump), electronically regulated

D

Double pump

40/

Nominal diameter for connection

1-8

Nominal head [m]

Technical data

  • Liquid temperature range from -10 °C to +110 °C
  • Power connection 1~230 V, 50/60 Hz
  • Protection class IPX4D
  • Flange connection DN 32 to DN 80
  • Maximum operating pressure with standard version: 6/10 bar or 6 bar (special version: 10 bar or 16 bar)

Materials

  • Pump body: Grey cast iron
  • Shaft: Stainless steel

Description/construction

  • Double wet rotor circulation pump with electronically commutated motor and integrated automatic speed control
  • Green button technology and graphical display
  • Motor protection with electronic cut-out
  • Socket connection for function expansion with IF modules for building automation
  • Flexible impeller with curved three-dimensional blades and separation cup made of synthetic fibre-based material

Download

Wilo-Stratos/-D/-Z/-ZD Download

Colors

DOP

More in this category:

Need a consultation?

We will tell you in detail about our services, types of work and typical projects, calculate the cost and prepare an individual offer!