Article: Н00003020
| Type | Universal |
| Interface | pulse output |
| Counting mechanism | mechanical |
| Du | DN20 |
| Nominal pressure, MPa | 1.6 |
| Drawer length, L | 130 mm |
| Minimum pulse width | 100ms |
| Max flow, Qmax | 5 m3/h |
| Rated flow, Qn | 2.5 m3/h |
| Tolerance in the Qt range ≤ Q≤ Qmax | ±2% |
| Permissible error in the range Qmin ≤ Q < Qt | ±5% |
| Water temperature range | +5 to +90 °C |
| Impulse weight | 1 l/imp 10 l/imp |
| Maximum current for reed sensor | 50mA |
| Transitional flow for class A, Qt | 0.25 m3/h |
| Transitional cost for class B, Qt | 0.2 m3/h |
| Minimum flow rate for class A, Qmin | 0.1 m3/h |
| Minimum flow rate for class B, Qmin | 0.05 m3/h |
The single-jet water meter "Pulsar" with a pulse output is designed to measure the volume of hot and cold drinking water according to SanPiN 2.1.4.1074-01 and network water flowing through the pipeline in cold and hot water supply systems. The device is equipped with a pulse output that sends pulses to a secondary device that counts the pulses and transmits information to the control room. This allows you to read data without direct access to the device and even without visiting the apartment in which it is located.
| Technical data | |
|---|---|
| Nominal pressure MPa | 1,6 |
| Permissible error in the range Qt ≤ Q ≤ Qmax, % | 2 |
| Permissible error in the range Qmin ≤ Q ≤ Qt, % | 5 |
| Water temperature | +5 °С cold water, +90 °С hot water |
| Number in the Register of Measuring Instruments of the Russian Federation | 63458—16 |
| Features of the | Ду15 | Ду15 | Ду15 | Ду20 | Ду20 |
|---|---|---|---|---|---|
| Accuracy class | А | В | С | А | В |
| Water consumption, m3/h | |||||
| — least, Qmin | 0,06 | 0,03 | 0,015 | 0,1 | 0,05 |
| — transition, Qt | 0,15 | 0,12 | 0,022 | 0,25 | 0,2 |
| — nominal, Qn | 1,5 | 1,5 | 1,5 | 2,5 | 2,5 |
| — the greatest, Qmax | 3,0 | 3,0 | 3,0 | 5,0 | 5,0 |
Универсальное приложение для работ по пусконаладке оборудования «Пульсар». Подходит для настройки приборов учета и счетчиков импульсов-регистраторов.
Version dated 08/05/2021.
Universal application for commissioning Pulsar equipment.
Suitable for setting up metering devices and pulse counters-recorders.
IoT installer. Designed for configuring radio transmitters.
In the case when the current settings of the converter are unknown, you can use the network device search utility.
Software for setting up electricity meters "Pulsar" during commissioning.
When starting the program, select the device in the "Object Tree". The set of tabs depends on the selected object or group of objects.
Types of tabs:
Подходит для автоматизированного учета в отдельных многоквартирных домах и жилищных комплексах:
Suitable for automated accounting in individual apartment buildings and housing complexes:
Для автоматизированного учета управляющих компаний, ТСЖ, ресурсоснабжающих организаций
Interchange protocols — water meters "Pulsar"
We will tell you in detail about our services, types of work and typical projects, calculate the cost and prepare an individual offer!
