| # | Feature | Value |
|---|---|---|
| 1 | Nominal diameter DN, mm | 15 |
| 2 | Valve tightness class | "A" |
| 3 | Operating temperature range, | °C -20/divide; +120 |
| 4 | Nominal pressure PN, bar | 25 |
| 5 | Average full service life, years | 15 |
| 6 | Maintainability | Yes |
AquaHit ball valves must be operated at the pressure and temperature specified in the table of technical characteristics. Adjustment of the flow rate with ball valves is not allowed. Installing the handle (ball) in an intermediate position may damage the valve seals. To completely shut off the flow, it is enough to turn the valve handle clockwise by 90 ° (until it stops); to open the tap - turn the handle counterclockwise by 90 ° (until it stops). If the valve has not been used for a long time, then opening / closing it may be difficult, and in this case additional force must be applied; you may need to remove the butterfly handle and use the handle. To exclude "souring" It is recommended to open / close the tap once or twice a year.
| # | Part name | Material | Material grade according to norms | |
|---|---|---|---|---|
| RF | EN | |||
| 1 | Ball Valve | Brass | ЛС-59-1 | HPb56-4 |
| 2 | Stock | Brass | ЛС-59-1 | HPb56-3 |
| 3 | Seat Rings | Teflon | Teflon | PTFE |
| 4 | Stem Seal | Teflon | Teflon | PTFE |
| 5 | Butterfly Nut | Steel | Ст3кп | Q235 |
| 6 | Locking nut | Brass | ЛС-59-1 | HPb56-4 |
| 7 | Lever | Steel | Ст3кп | Q235 |
| 8 | Small semi-hull | Brass | ЛС-59-2 | CW617N |
| 9 | Large semi-hull | Brass | ЛС-59-2 | CW617N |
We will tell you in detail about our services, types of work and typical projects, calculate the cost and prepare an individual offer!
