The set of taps is designed for underfloor heating systems. It is used to connect collector blocks. Due to the presence of thermocouples, it displays the temperature of the supply and return lines. Working pressure -16 bar.

The coupling connection of the tap must be performed using FUM (fluoroplastic sealing material) or sanitary polyamide thread as sealing materials. For installation of the valve, it is not allowed to use pipe lever wrenches (KTR) higher than the second number, while it is allowed to act with the key only on the hexagon of the valve inlet pipe. Fastening of flexible hoses to the tap fitting should be done using standard screw clamps. The use of wire twists for fastening hoses of various types is not allowed.

Ball valves MVI series BV.312… are shut-off valves and are not intended for flow regulation. They perform the function of quickly shutting off the flow on pipelines for domestic use of hot and cold water supply systems, heating. Do not create flow resistance Ball valves must not be used as control valves. Ball valves with a BV.312.06 thermometer are often installed in front of the collector block of a warm floor (or other system). Serve for quick connection / disconnection of collectors, as well as for visualization of the temperature of the supply and return lines 9 due to the presence of thermometers). A ball valve with a red butterfly is installed on the supply line, with a blue one - on the return line.