Manifold from stainless steel MVI, mts 100mm ML.403.06

Article: ML.403.06

# Feature Value
1 Maximum operating temperature of the medium, ° С 130
2 Nominal maximum pressure, bar 16
3 Distance between outputs, mm 100
4 Number of bends, pcs 1-8
5 Riser connection DN 25-32
7 Accession to apartment CO DN 15
8 Wall thickness, mm 1.6
9 Service life, years 25

Overview

Distribution manifolds from MVI are designed to distribute the flow of the transported medium to consumers. Collector systems can be used on pipelines of cold (including drinking) and hot water supply systems, heating, compressed air, as well as on process pipelines transporting liquids that are not aggressive to the materials of collector system elements. The use of manifold systems makes it possible to equalize the pressure according to consumers, carry out centralized regulation of the flow rate, remove air and drain the working medium. Steel, polymer, metal-polymer and copper pipelines can be connected to MVI manifolds. Collectors with an outlet pitch of 100 mm are used, as a rule, in heating units and storey units for metering and distributing heat energy and water. The manifolds have two sockets (G1 / 2") with a female thread in the upper part, in which a plug and an air vent are installed. One main outlet is completed with a plug. The thread type on the upper and lower outlets of the beam is G. They are supplied from 2 to 8 outlets with a thread size connecting the mains DN25 and DN32.

Model overview

Those. information

Name Ø Inlets Ø Outlets Number of Outlets
MVI stainless steel manifold 1" 1/2" 2
MVI stainless steel manifold 1" 1/2" 3
MVI stainless steel manifold 1" 1/2" 4
MVI stainless steel manifold 1" 1/2" 5
MVI stainless steel manifold 1" 1/2" 6
MVI stainless steel manifold 1" 1/2" 7
MVI stainless steel manifold 1" 1/2" 8
MVI stainless steel manifold 1 1/4" 1/2" 2
MVI stainless steel manifold 1 1/4" 1/2" 3
MVI stainless steel manifold 1 1/4" 1/2" 4
MVI stainless steel manifold 1 1/4" 1/2" 5
MVI stainless steel manifold 1 1/4" 1/2" 6
MVI stainless steel manifold 1 1/4" 1/2" 7
Materials


Коллектор из Нерж. стали
# Part name Material Material grade according to norms
RF EN
1 Collector body Stainless steel 08Х18Н10 AISI304
2 Trunk plug Brass ЛС-59-2 CW617N
3 Top cap (body) Brass ЛС-59-2 CW617N
4 Top Cover Cap Plastic Plastic ABS
5 Air Vent Housing Brass ЛС-59-2 CW617N
6 Air Vent Cover Plastic Plastic ABS
7 Threaded outlet, bottom Brass ЛС-59-2 CW617N
8 O-ring seals Elastomer ЕПДМ EPDM
Sizes


ML.4xx.06
ML.4xx.06
ML.4xx.07
ML.4xx.07

Download

Colors

DOP

More in this category:

Need a consultation?

We will tell you in detail about our services, types of work and typical projects, calculate the cost and prepare an individual offer!