AquaHit ball valves with half-fit must be operated at the pressure and temperature specified in the table of technical characteristics. Adjustment of the flow rate with ball valves is not allowed. Installing the handle (ball) in an intermediate position may damage the valve seals. To completely shut off the flow, it is enough to turn the valve handle clockwise by 90 ° (until it stops); to open the tap – turn the handle counterclockwise 90 ° (all the way). If the valve has not been used for a long time, then opening / closing it may be difficult, and in this case additional force must be applied; you may need to remove the butterfly handle and use the handle. To exclude "souring" It is recommended to open / close the tap once or twice a year.

#	Part name	Material	Material grade according to norms
			RF	EN
1	Large semi-hull	Brass	ЛС-59-2	CW617N
2	Ball Valve	Brass	ЛС59-1	HPb56-4
3	Seat Rings	Teflon	Teflon	PTFE
4	Stem Seal	Teflon	Teflon	PTFE
5	Butterfly Nut	Steel	Ст3кп	Q235
6	Locking nut	Brass	ЛС-59-2	CW617N
7	Butterfly	Aluminum alloy	Aluminum	Al
8	Small semi-hull	Brass	ЛС-59-2	CW617N
9	Halftone fitting	Brass	ЛС-59-2	CW617N
10	Seal half-head	Teflon	Teflon	PTFE
11	Stock	Brass	ЛС59-1	HPb58-3
12	Half nut	Brass	ЛС-59-2	CW617N